4,200 wing rib brackets with zero rejects
A seven-month production run of thin-wall aluminum brackets, machined on 5-axis centers with a fixture that holds flatness after each clamp.
CNC machining · sheet metal · assembly
Five-axis milling, turning and formed sheet metal for aerospace, medical, energy and robotics teams. Send a drawing and get a written quote within 48 hours.
The shop
Vantage started in 1991 in a rented bay with two manual mills and a granite plate. Today the shop runs 52,000 sq ft in Sterling, Illinois, making structural brackets, surgical instrument parts and valve bodies for hydrogen equipment.
Nothing ships on a promise. First articles are measured on the CMM, in-process checks run every tenth part, and the traveler is signed at each operation by the person who did the work.
Capabilities
Milling, turning, sheet metal, welding, assembly and finishing in one building. One supplier, one traveler, one inspection report.
3, 4 and 5-axis milling for housings, brackets and manifolds, from a single prototype to production runs.
DetailsTurning centers with live tooling and Swiss-type lathes for shafts, pins, fittings and small precise parts.
DetailsFiber laser cutting, precision bending and hardware insertion for panels, brackets and enclosures.
DetailsTIG, MIG and robotic welding with post-weld machining in the same building.
DetailsMechanical sub-assembly, kitting and functional testing, so you receive one tested unit instead of a box of parts.
DetailsIndustries
Each industry runs on its own paperwork: first article reports, lot traceability, cleaning and packaging rules. We keep all of it with the job.
Structural and system parts for aircraft, engines and ground support equipment.
View industrySmall, precise parts in titanium, stainless and PEEK for instrument and device makers.
View industryValve bodies, flanges and pump parts for hydrogen, oil and gas and power generation.
View industryJoint housings, end effectors and frames for robot and automation builders.
View industryChamber components, lids and fittings with fine surface finishes and clean packaging.
View industryManifolds, gearbox housings and machine bases for OEMs that build the machines other factories run on.
View industryEquipment
Buyers ask what we run before they ask what we charge. Here is the short list, kept current when a machine comes in or goes out.
| Machine | Type | Work envelope | Units |
|---|---|---|---|
| 5-axis VMC 750 | 5-axis vertical milling | 29.5 × 25.6 × 19.7 in | 3 |
| Horizontal HMC 630 | 4-axis horizontal milling | 41.3 × 35.4 × 38.6 in | 2 |
| Vertical VMC 1600 | 3-axis vertical milling | 63 × 32 × 30 in | 4 |
| Mill-turn MT 2500 | Multi-axis mill-turn | Ø 26 × 59 in | 2 |
| Turning center TC 400 | Turning with live tooling | Ø 16 × 24 in | 4 |
| Swiss lathe SL 32 | Swiss-type turning | Ø 1.25 in bar | 4 |
Quality
Two CMMs, a temperature-controlled inspection room and an inspector with authority to stop any job. You get the report, not just a promise.
Template note: certification names, registrations and performance figures on this page are illustrative sample content for a demo build. They are not a claim of a real, current certification.
How it runs
Every order follows the same line. You always know which station your parts are at, and who is responsible for them.
An engineer reads the drawing, flags anything that will cost you money and sends a written quote with lead time and assumptions.
Day 0 to 2
CAM programs and fixtures are built and saved, so a repeat order starts from a proven setup instead of a blank sheet.
Week 1
The first part is measured on the CMM. You get the report and approve it before production is released.
Week 1 to 2
Two shifts with in-process checks every tenth part and a traveler signed at every operation.
Week 2 to 4
Deburr, finish, final inspection and certificates in the box, with a tracking number the same day.
Week 4
Projects
Three programs that show how a fixture, a process choice or an inspection step changed the outcome.
A seven-month production run of thin-wall aluminum brackets, machined on 5-axis centers with a fixture that holds flatness after each clamp.
Titanium instrument housings with a sealed cavity, machined, cleaned and pressure tested before every shipment.
316L valve bodies with a hydrogen-tight seat, turned and milled in one cycle to keep the bore and the seal face concentric.
Reviews
Sample testimonials for this template. They describe the things buyers actually ask about: setup discipline, reports and repeatability.
They caught a tolerance stack on our drawing before quoting. That one call saved us a failed first article.
We send a model on Monday and have parts on the bench two weeks later. The inspection reports come with every lot.
Vantage built production fixtures for our prototypes. When we scaled to 500 a month, nothing had to change.
Careers
Two shifts, paid training on the 5-axis machines, health cover from day one and a retirement plan with a 4% match. Apprentices get a raise every six months. Job listings here are sample template content.
News
Machine installs, quoting process and audit results. Short posts, written by the people who did the work.
We added two 5-axis machining centers this summer. Here is what changes for lead times and part size.
What happens between the moment a drawing lands and the moment a quote comes back.
One minor observation on calibration labels, closed the same week. Here is what the auditor looked at.
Before the first order
Mon to Fri, 7:30am to 5pm Central. You reach a person who can read a drawing, not a call queue.
FAQ
A 2D drawing with tolerances plus a 3D model in STEP or IGES, the quantity, the material and the finish you need. A PDF drawing alone is enough for us to give an indicative price.
No. One prototype part is a normal order here. Small lots cost more per piece because setup time is spread over fewer parts, and the quote shows that clearly.
Most quotes go out within 48 working hours. Assemblies or parts with unusual processes can take longer, and we tell you on day one what we are still waiting for.
No. This template only collects general, non-confidential inquiries through the request form. Please do not send drawings, controlled technical data, NDA requests or anything you consider confidential.
Every lot gets a dimensional check against the drawing. First articles ship with a full report, and production lots can include CMM reports when the print or your quality plan asks for them.
Yes, with the buyer arranging duties and freight terms. Export-controlled work is out of scope for this template and for the demo form.
STEP, IGES, PDF or DXF with quantities and finish notes. An engineer reads every request, and the reply comes with assumptions and lead time spelled out.