About
A second-generation shop in Sterling, Illinois: 27 machines, two shifts and one rule that has not changed since 1991.
About the shop
A second-generation shop, still measured on a granite plate
Vantage opened in 1991 in a rented bay in Sterling, Illinois with two manual mills, a surface grinder and one rule from the founder: the part matches the drawing, or it does not ship.
Thirty-five years later the shop is 52,000 sq ft with 27 machines, two shifts and a tool room that builds fixtures for jobs nobody else wants to set up. The founder's daughter runs operations and the same rule still applies.
We are not the cheapest quote on the sheet. We are the shop that tells you on day one when a drawing will fail, before you pay for a first article that cannot pass.
Milestones
How the floor grew
Sample company history for this template. The dates show the shape of a shop growing from manual work into 5-axis production.
| Year | What changed |
|---|---|
| 1991 | Two manual mills, a surface grinder and a rented bay on Foundry Road. |
| 1998 | First CNC vertical mill; the shop adds a second shift within a year. |
| 2006 | Quality system documented and certified for the first time; CMM installed. |
| 2014 | Sheet metal department added: fiber laser, press brakes and hardware insertion. |
| 2021 | First 5-axis machining center; fixture design moves fully in house. |
| 2026 | 27 machines, 52,000 sq ft and a second 5-axis cell running production. |
How we work
Three rules that survive a busy week
Every shop says it does quality work. These are the habits that decide whether that is true on the Friday before a shutdown.
- Read the drawing before quoting it. If a callout will not survive the process, you hear it before the order, not after.
- Sign the traveler at every operation, with the name of the person who did the work.
- Keep the fixture. A repeat order should start from a proven setup, not from a blank sheet.
- Stop the job when the measurement says stop, even when the delivery date says keep going.
Send a drawing. Get a quote in 48 hours.
STEP, IGES, PDF or DXF with quantities and finish notes. An engineer reads every request, and the reply comes with assumptions and lead time spelled out.