Equipment
27 machines, listed with their real work envelopes. Buying capacity is easier when the envelope is on the page.
Equipment list
The machines, with the envelope that actually limits your part
Work envelope is the number that decides whether a part can run here. Units column is how many of that machine are on the floor.
| Machine | Type | Work envelope | Units |
|---|---|---|---|
| 5-axis VMC 750 | 5-axis vertical milling | 29.5 × 25.6 × 19.7 in | 3 |
| Horizontal HMC 630 | 4-axis horizontal milling | 41.3 × 35.4 × 38.6 in | 2 |
| Vertical VMC 1600 | 3-axis vertical milling | 63 × 32 × 30 in | 4 |
| Mill-turn MT 2500 | Multi-axis mill-turn | Ø 26 × 59 in | 2 |
| Turning center TC 400 | Turning with live tooling | Ø 16 × 24 in | 4 |
| Swiss lathe SL 32 | Swiss-type turning | Ø 1.25 in bar | 4 |
| Fiber laser FL 6000 | Sheet metal cutting | 120 × 60 in bed | 1 |
| Press brake PB 250 | CNC bending | 126 in, 250 ton | 3 |
| CMM Global S | Inspection | 28 × 40 × 24 in | 2 |
| Wire EDM W 600 | Wire EDM | 23.6 × 15.7 × 13.8 in | 1 |
Sample equipment data for this template. Envelopes are listed in inches; the shop also runs saws, drill presses, a tool room and a granite plate room.
Tooling
What sits next to the spindles
Capacity is not only spindle hours. Fixtures, gauges and drying capacity decide how fast a job can move.
- Tool room with manual mill, lathe and surface grinder for fixture work
- Two CMMs in a temperature-controlled inspection room
- Granite plate, height gauges and a full pin and thread gauge set
- Dedicated weld cells, leak test benches and an assembly area
- Pallet pool on the 5-axis cell for lights-out production
Send a drawing. Get a quote in 48 hours.
STEP, IGES, PDF or DXF with quantities and finish notes. An engineer reads every request, and the reply comes with assumptions and lead time spelled out.