4,200 wing rib brackets with zero rejects
A seven-month production run of thin-wall aluminum brackets, machined on 5-axis centers with a fixture that holds flatness after each clamp.
The bracket was 0.16 in thick at the web with a bore that had to hold Cpk above 1.33 across the run. Machining it in three setups moved the part enough that flatness drifted outside tolerance on the first trial lot.
We designed a two-station fixture that supports the web from below and clamps on the perimeter. With one 5-axis setup, flatness held and the bore stayed concentric through all 4,200 pieces.
What the run looked like
- Fixture design and first article in 9 working days
- In-process CMM checks every 25th part
- Digital traveler signed at each operation
- Zero nonconforming parts across the run
Send a drawing. Get a quote in 48 hours.
STEP, IGES, PDF or DXF with quantities and finish notes. An engineer reads every request, and the reply comes with assumptions and lead time spelled out.