Titanium housings for a surgical robot
Titanium instrument housings with a sealed cavity, machined, cleaned and pressure tested before every shipment.
Each housing has a sealed cavity that must not leak and a mounting face that must stay flat after anodizing. The first samples were machined individually, then we built a fixture that holds six parts per cycle.
Cleaning, sealing and pressure testing run as a documented sequence on the same traveler, so a unit cannot ship without a test record attached to its serial number.
What the run looked like
- Six-up fixture for a stable cycle time
- Serialized traveler per housing
- 100% pressure test with recorded results
- Clean handling and double-bagged packaging
Send a drawing. Get a quote in 48 hours.
STEP, IGES, PDF or DXF with quantities and finish notes. An engineer reads every request, and the reply comes with assumptions and lead time spelled out.